Generator supplier Abu Dhabi
Diesel generator systems for Abu Dhabi projects.
We build and test generator systems at our Dubai facility, then coordinate delivery and commissioning for industrial, infrastructure, commercial and critical-power sites in Abu Dhabi.
Technical supply
One supply team for the generator and its site connections
We coordinate equipment selection, enclosure fabrication, controls, testing and delivery as one job. That reduces the gaps that appear when each part is handled separately.
Industrial power
Prime and standby packages for plants, workshops, process loads and utilities with motor-starting and maintainability review.
Infrastructure
Generator systems for transport, utilities and major developments with controlled interfaces and inspection records.
Critical facilities
Fast-start, redundancy, synchronization, load acceptance and witnessed testing for operationally critical loads.
Oil and gas
Project-specific hazardous-area equipment, shutdown interfaces, coatings, containment and documentation.
ExplorePackage selection
Open, acoustic and containerized diesel generators for Abu Dhabi
Swipe horizontally to view all columns
| Configuration | Where it fits | Items to confirm |
|---|---|---|
| Open generator set | Dedicated plant rooms and protected industrial installations | Room airflow, exhaust, access, fuel and building acoustic treatment |
| Sound-attenuated canopy | Outdoor standby and prime-power locations with weather and noise requirements | Noise criterion, radiator airflow, door access and fuel autonomy |
| Containerized system | Large generators, critical facilities and custom industrial packages | Transport dimensions, ventilation, exhaust, fire strategy and maintenance zones |
| Synchronized multi-set plant | Redundant or expandable power systems and large step-load applications | Control philosophy, protection, bus arrangement, sequencing and load management |
-
Open generator set
- Where it fits
- Dedicated plant rooms and protected industrial installations
- Items to confirm
- Room airflow, exhaust, access, fuel and building acoustic treatment
-
Sound-attenuated canopy
- Where it fits
- Outdoor standby and prime-power locations with weather and noise requirements
- Items to confirm
- Noise criterion, radiator airflow, door access and fuel autonomy
-
Containerized system
- Where it fits
- Large generators, critical facilities and custom industrial packages
- Items to confirm
- Transport dimensions, ventilation, exhaust, fire strategy and maintenance zones
-
Synchronized multi-set plant
- Where it fits
- Redundant or expandable power systems and large step-load applications
- Items to confirm
- Control philosophy, protection, bus arrangement, sequencing and load management
Site conditions
Design around the actual installation
The design basis should state maximum ambient temperature, altitude, dust exposure, coastal or corrosive conditions, acoustic requirements and the available installation area. These inputs influence rating, cooling, filtration, coating, enclosure layout and maintenance intervals.
Oil and gas and industrial sites may add area classification, gas group, temperature class, shutdown philosophy, lifting rules, coating systems and inspection hold points. Those requirements must be issued before equipment is selected and released for manufacture.
- Load schedule, largest motor and expected load steps
- Prime, standby or continuous operating duty
- Voltage, frequency, phase and earthing requirements
- Ambient, dust, corrosion and noise design criteria
- Fuel autonomy, containment and refilling arrangement
- Site access, crane plan and installation responsibility
Delivery workflow
Make sure the factory and site are ready at the same time
- 01
Define
Confirm duty, rating basis, site conditions, project specification, approved makes and scope boundaries.
- 02
Submit
Issue technical data, drawings, controls information, deviations and inspection requirements for review.
- 03
Manufacture
Assemble and fabricate the approved package with documented inspection checkpoints.
- 04
Test
Complete functional and agreed load-bank testing, close observations and release documentation.
- 05
Mobilize
Coordinate transport, offloading, installation interfaces, pre-start checks and commissioning in Abu Dhabi.
Regulations & Logistics
ADDC utility compliance, industrial freight corridors and CICPA gate passes
Standby and emergency generator installations in Abu Dhabi and Al Ain must satisfy Abu Dhabi Distribution Company (ADDC) and Al Ain Distribution Company (AADC) Electricity Wiring Regulations. Patsons engineers four-pole automatic transfer switches (ATS) with mechanical and electrical interlocks to ensure complete galvanic isolation from the utility network, paired with verified neutral grounding.
Operating from Dubai Industrial City (DIC) directly on the Dubai–Abu Dhabi border, our logistics team dispatches equipment via the E11 freight corridor with pre-cleared transport documentation: reaching KEZAD and Khalifa Port in approximately 40 minutes, Mussafah and ICAD I/II/III within 60–75 minutes, and Al Ain in 90 minutes. Drivers and field commissioning engineers maintain CICPA security gate-pass readiness for restricted coastal, utility and oil and gas facilities.
- ADDC & AADC compliant 4-pole ATS interlocks preventing utility backfeed
- Fast E11 transport corridors from DIC to KEZAD, Mussafah, ICAD and Al Ain
- CICPA security gate-pass coordination for critical oil, gas and utility infrastructure
- Heavy low-bed logistics for containerized 1,000–3,000 kVA systems to Ruwais and Al Dhafra
- Tropicalized 50°C heavy-duty cooling packages for Western Region desert environments
Frequently asked questions
Common questions
Can’t find what you need? Send us your requirement and our team will help.
Does Patsons supply diesel generators in Abu Dhabi?
Yes. Patsons supplies engineered diesel generator systems for Abu Dhabi projects. The equipment is engineered and assembled at the company manufacturing facility in Dubai Industrial City and coordinated for delivery and commissioning in Abu Dhabi.
Is the Patsons manufacturing factory located in Abu Dhabi?
No. Our manufacturing facility is in Dubai Industrial City. We build there and coordinate delivery and support for Abu Dhabi projects.
Are Patsons generator packages compliant with ADDC and AADC regulations?
Yes. Standby generator installations for Abu Dhabi and Al Ain are configured with four-pole automatic transfer switches (ATS), mechanical and electrical interlocks, and dedicated neutral earthing in full compliance with ADDC/AADC Electricity Wiring Regulations.
What generator sizes can be supplied for Abu Dhabi?
Patsons develops single-set projects from 100 to 3,000 kVA and can engineer synchronized multi-set systems. Final ratings depend on duty, selected components, electrical output, ambient conditions and derating.
Can Patsons support Abu Dhabi oil and gas projects?
Patsons can develop custom packages with specified hazardous-area components, shutdown interfaces, coatings and documentation. The client or appointed engineer must provide the area classification and project requirements.
Can the generator be factory tested before delivery?
Yes. Functional checks and agreed load-bank testing can be completed before dispatch. Witness points, instrumentation, load steps, duration and acceptance criteria should be defined in the inspection and test plan.